Vision Tester
Equipped with a Camera for Photographing Products, Including not only any Defects on the External Appearance of Glass or Plastic Containers but also Quantity, Omission, Location, Shape and Dimensions, and for Inspecting the Images using Image Analysis Technology.
The Equipment can Detect Even a Minor Defect, which can Barely be Detected with the Human Eye, and Perform a Conformance Test.
As the System can Inspect Every part of a Product Instead of a Human, It is Effectively Applied to Factory Automation.
As the System can Inspect Every part of a Product Instead of a Human, It is Effectively Applied to Factory Automation.
-
Vision Inspector -
System Controller
Feature
-
Display Composition
- Display Measurement Result on Screen
-
Tough Durability
- Tough Component for Heat and Dust
-
Easy to Use
- Easy to Register and Set-up Model
- Easy to Identify Quality of Measurement Result
-
DB Expandability
- Monitoring and Remotely Controlling Production Status by Local PC
-
Simple to Installation and Maintenance
-
PC Specification
- Windows 7, i7-4790, CPU @ 3.6GHz
- RAM 8.0GB, 64bit Operating System
-
Vision Inspector Size
- 370W x 864D x 461.5H (mm)
System Composition
- ① Key / Button
- ② Servo Motor(Index Motor) Driver
- ③ Back Light(BLU)
- ④ Servo Motor(Index Motor)
- ⑤ Stepping Motor(Wheel Motor)
- ⑥ Roto-Wheel
- ⑦ Bottom Area Camera
- ⑧ OPC Line Camera
- ⑨ Area Camera 1, 2
- ⑩ Stepping Motor Driver
- ⑪ PLC Controller
- ⑫ Inspector Tilt Adjustment
- ⑬ Inspector Left / Right Adjustment
Ampoule Measurements
- ① Body Diameter
- ② Construction Diameter
- ③ Bulb Diameter
- ④ Funnel Diameter
- ⑤ Stem on Closing Height
- ⑥ Ampoule Length
- ⑦ Bodyheight
- ⑧ Construction Height
- ⑨ Run out Construction
- ⑩ Run out Blub
- ⑪ Run out Top
- ⑫ Base Depth
- ⑬ Base Angle
- ⑭ Dirt
OPC Measurements
- ① Diameter OPC Point(Axial)
- ② Diameter OPC Point(Circumferential)
- ③ Ovality OPC Point
- ④ Satellite Area OPC Point
- ⑤ Hole Area OPC Point
- ⑥ Eccentricity OPC Point Cut
- ⑦ Length OPC Cut
- ⑧ Width OPC Cut
- ⑨ Satellite Area OPC Cut
- ⑩ OPC Cut Height
- ⑪ OPC Point Height
- ⑫ Min / Mean / Max Width C/B Ring
Bottom Measurements
- ① Bottom Dirt
Program Function Key
- ① Display Menu Selection
- ② Inspection Result Menu Selection
- ③ REPORT / RESET Button
- ④ Temporarily Saving Button
- ⑤ ONCE Button
- ⑥ CONTI (CONTINUE) Button
- ⑦ Current Model
- ⑧ Measurement Item, Status Display
- ⑨ Inspection Start Button
- ⑩ Check Item
- ⑪ Communication Display
Product View
